LT1018CS8#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1018 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Qualification Status | Not Qualified |
| Output Type | Pull Up |
| Number of Elements | 2 |
| Power Supplies | 1.1/40V |
| Supply Current-Max | 0.3mA |
| Voltage - Supply, Single/Dual (±) | 1.1V~40V ±0.55V~20V |
| Average Bias Current-Max (IIB) | 0.1μA |
| Supply Voltage Limit-Max | 40V |
| Current - Quiescent (Max) | 250μA |
| Voltage - Input Offset (Max) | 1mV @ ±20V |
| Current - Input Bias (Max) | 0.075μA @ ±20V |
| CMRR, PSRR (Typ) | 115dB CMRR, 110dB PSRR |
| Current - Output (Typ) | 70mA @ 4.5V |
| Propagation Delay (Max) | 6μs |
| Width | 3.899mm |
| RoHS Status | ROHS3 Compliant |
LT1018CS8#TRPBF Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) for ease of transportation.This comparator is of the Pull Up output type.This package has been designed with Tape & Reel (TR) .The comparator has 8 terminals.Electronic comparator is a component of the Comparator family.With a voltage of 4.5V supplied, the comparator is capable of performing a wide range of demanding tasks.In general, the chip type can be classified as General Purpose .The total number of elements is 2 .As a result, it contains 8 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to 0°C~70°C to prevent malfunctions.Alternatively, you may search for LT1018 to find more pin-to-pin solutions for your specific needs.There is sufficient power to run the device from 1.1/40V power supplies.Providing a minimum current of 0.3mA is possible for this part.
LT1018CS8#TRPBF Features
Pull Up output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
LT1018CS8#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LT1018CS8#TRPBF linear comparators applications.
- Power management
- Infotainment & cluster
- DC/DC and AC/DC power supplies
- Consumer Medical Electronics
- Infotainment and Clusters
- Mobile Communications
- Hand-Held Electronics
- Threshold Detectors
- Self-diagnostics
- Battery management and protection
