LT1018IS8#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1018 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Pull Up |
| Number of Elements | 2 |
| Power Supplies | 1.1/40V |
| Output Current | 70mA |
| Propagation Delay | 6 μs |
| Quiescent Current | 250μA |
| Supply Current-Max | 0.3mA |
| Common Mode Rejection Ratio | 110 dB |
| Voltage - Supply, Single/Dual (±) | 1.1V~40V ±0.55V~20V |
| Input Offset Voltage (Vos) | 1mV |
| Voltage Gain | 125dB |
| Average Bias Current-Max (IIB) | 0.1μA |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Supply Voltage Limit-Max | 40V |
| Input Bias Current | 75nA |
| Current - Quiescent (Max) | 250μA |
| Voltage - Input Offset (Max) | 1mV @ ±20V |
| Current - Input Bias (Max) | 0.075μA @ ±20V |
| CMRR, PSRR (Typ) | 115dB CMRR, 110dB PSRR |
| Current - Output (Typ) | 70mA @ 4.5V |
| RoHS Status | ROHS3 Compliant |
LT1018IS8#TRPBF Overview
To facilitate transportation, it comes packaged in 8-SOIC (0.154, 3.90mm Width) .Output type Pull Up is used for this comparator.The part will be shipped by Tape & Reel (TR) .As you can see, the comparator has8 terminals.The component belongs to the Comparator family of electrical components.When supplied with 4.5V voltage, the comparator is capable of performing a wide range of tasks.A comparator of this type is typically of type General Purpose .There are a total of 2 elements in it.The device includes 8 pins.The type of mounting recommended is Surface Mount .To ensure proper functioning, the operating temperature should be set to -40°C~85°C .8 pins are present on the comparator.If you require more pin-to-pin solutions, search LT1018 for more options.There is 250μA current flowing in this comparator.1.1/40V power supplies are enough to run the device.The voltage gain of the part is indicated by 125dB in the voltage formula.Comparator electronics is possible to supply this part wComparator electronicsh a minimum current of 0.3mA .
LT1018IS8#TRPBF Features
Pull Up output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 250μA
Voltage Gain: 125dB
LT1018IS8#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LT1018IS8#TRPBF linear comparators applications.
- Power management
- Body Control Modules
- Ultra-Low Power Systems
- Motor drives
- Point of load regulators
- Window Comparators
- Set Top Boxes
- Simple Analog-to-Digital Converters (ADCs)
- Automotive
- Notebooks and PDAs
