LT1018MJ8883
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | CDIP |
| Number of Pins | 8 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Operating Supply Voltage | 15V |
| Number of Elements | 2 |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 1.1V |
| Nominal Supply Current | 250μA |
| Max Supply Current | 300μA |
| Common Mode Rejection Ratio | 115 dB |
| Current - Input Bias | 18pA |
| Input Offset Voltage (Vos) | 1mV |
| Voltage Gain | 125dB |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Max Dual Supply Voltage | 20V |
| Min Dual Supply Voltage | 550mV |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
LT1018MJ8883 Overview
The product is packaged in CDIP to facilitate transportation.Currently, it consists of only 2 elements.The comparator has 8 pins.There is a Through Hole on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current for the device be set to 250μA .An excess of current supply over 300μA could result in malfunction of the comparator.From the voltage formula, the voltage gain of the part is 125dB .Temperatures above 125°C are not recommended.Comparator electronics cannot be operated at a temperature lower than -55°C .A comparator is designed to operate at a maximum supply voltage of 40V .This comparator allows minimum supply voltage of 1.1V .In order to operate normally, a supply voltage of 0 is required.
LT1018MJ8883 Features
Employing 2 elements
Voltage Gain: 125dB
LT1018MJ8883 Applications
There are a lot of Analog Devices, Inc. LT1018MJ8883 linear comparators applications.
- Simple Analog-to-Digital Converters (ADCs)
- Factory automation & control
- Multivibrators and High-Voltage Digital Logic Gates
- System control and monitoring
- Zero-Crossing Detectors
- Set Top Boxes
- General-Purpose Portable Devices
- Automotive
- Battery-Powered Electronics
- Zero-Crossing Detectors
