LT1028CS8#PBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Number of Elements | 1 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 44V |
| Min Supply Voltage | 8V |
| Operating Supply Current | 7.6mA |
| Slew Rate | 15 V/μs |
| Common Mode Rejection Ratio | 110 dB |
| Current - Input Bias | 180nA |
| Input Offset Voltage (Vos) | 10μV |
| Bandwidth | 50MHz |
| Gain Bandwidth Product | 75MHz |
| Voltage Gain | 149.54dB |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Max Dual Supply Voltage | 22V |
| Min Dual Supply Voltage | 4V |
| Dual Supply Voltage | 9V |
| Nominal Gain Bandwidth Product | 75MHz |
| Number of Amplifiers | 1 |
| Height | 1.48mm |
| Length | 5mm |
| Width | 3.99mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LT1028CS8#PBF Overview
Packaging for the buffer amplifier is in the form of a SOIC case. 8 pins are available on the instrumentation amplifier. As far as the input offset voltage is concerned, linear amplifier rates at 10μV. Using a supply current of 7.6mA , this buffer op amp will be able to operate. There should be no change in the voltage gain. In total, there are 1 circuits on this buffer amplifier. 1 channels are available on the instrumentation amplifier. It should not lower than 0°C to operate buffer amplifier. A temperature greater than 70°C should not be used for the operation of buffer amplifier. There are 1 elements in total in this linear amplifier. Regarding the voltage of the supply, this electrical part can work from a voltage as low as 44V, and this is an excellent feature. In order to ensure that the instrumentation amplifier's supply voltage remains above 8V, it is recommended to keep it higher. As a rule of thumb, you should conduct this electronic part under a dual voltage supply of 22V volts. A total of 1 instrumentation amplifiers are present on the device.
LT1028CS8#PBF Features
149.54dB voltage gain
LT1028CS8#PBF Applications
There are a lot of Analog Devices, Inc. LT1028CS8#PBF Instrumentational OP Amps applications.
- Weighing systems
- Automation control systems
- Comparator
- Power control
- Multiplication circuits
- E-book readers
- Gaming industry
- Measurements of Wheatstone bridge
- Information processing
- Non-polarized electrodes
