LT1028CS8#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LT1028 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Number of Circuits | 1 |
| Operating Supply Current | 7.6mA |
| Slew Rate | 15V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 110 dB |
| Current - Input Bias | 30nA |
| Voltage - Supply, Single/Dual (±) | ±4V~18V |
| Input Offset Voltage (Vos) | 10μV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 75000 kHz |
| Voltage Gain | 149.54dB |
| Average Bias Current-Max (IIB) | 0.24μA |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Low-Offset | YES |
| Frequency Compensation | YES AVCL>=2 |
| Supply Voltage Limit-Max | 22V |
| Voltage - Input Offset | 20μV |
| Neg Supply Voltage-Max (Vsup) | -22V |
| Nominal Gain Bandwidth Product | 75MHz |
| Wideband | YES |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1028CS8#TRPBF Overview
It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. The instrumentation amplifier in this picture is of the General Purpose-type. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. It is estimated that there will be 8 terminations in the next few months. Buffer amplifier has a total of 8 pins. This linear amplifier should be powered by an 15V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. An 8-pin op amp ic is included in the package. In terms of input offset voltage, operational amplifier rates 10μV. For this electronic part, it is recommended that you mount it with type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around 0°C~70°C . It is possible to operate this buffer amplifier from a supply current of 7.6mA . 149.54dB should remain the voltage gain. This op amp ic has 1 circuits. There are a total of 1 elements in this linear amplifier. To pack the operational amplifier ics, TAPE AND REEL is adopted as the packing method.
LT1028CS8#TRPBF Features
8 Pins
supply voltage of 15V
149.54dB voltage gain
LT1028CS8#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LT1028CS8#TRPBF Instrumentational OP Amps applications.
- Radar
- Signal filtering
- single/dual op amp sum and difference circuits
- Weak signal detection
- Video conversion and routing
- Cinema or auditorium audio system
- Portable media players
- Polarized electrodes
- Mobile phone
- Biopotential
