Parameters | |
---|---|
Factory Lead Time | 1 Week |
Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
Contact Plating | Gold |
Mounting Type | Through Hole |
Package / Case | 8-DIP (0.300, 7.62mm) |
Surface Mount | NO |
Number of Pins | 8 |
Weight | 440.409842mg |
Operating Temperature | 0°C~70°C TA |
Packaging | Tube |
JESD-609 Code | e4 |
Pbfree Code | yes |
Part Status | Active |
Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
Number of Terminations | 8 |
ECCN Code | EAR99 |
Technology | BIPOLAR |
Terminal Position | DUAL |
Terminal Pitch | 2.54mm |
Frequency | 25kHz |
Base Part Number | LT1054 |
Function | Ratiometric, Step-Up |
Number of Outputs | 1 |
Output Voltage | -5V |
Output Type | Adjustable (Fixed) |
Max Output Current | 100mA |
Input Voltage-Nom | 7V |
Max Supply Voltage | 15V |
Min Supply Voltage | 3.5V |
Analog IC - Other Type | SWITCHED CAPACITOR REGULATOR |
Operating Supply Current | 2.5mA |
Output Configuration | Positive or Negative |
Quiescent Current | 2.5mA |
Max Output Voltage | -5.2V |
Voltage - Output (Min/Fixed) | 3.5V -Vin 2Vin |
Topology | Charge Pump |
Logic Function | Inverting |
Supply Current-Max (Isup) | 4.5mA |
Synchronous Rectifier | No |
Dropout Voltage | 1.1V |
Min Output Voltage | -4.7V |
Switcher Configuration | DOUBLER INVERTER |
Voltage - Output (Max) | 26.4V |
Nominal Output Voltage | -5V |
Height | 5.08mm |
Length | 9.81mm |
Width | 6.35mm |
Thickness | 3.9mm |
REACH SVHC | No SVHC |
RoHS Status | ROHS3 Compliant |
Lead Free | Lead Free |
LT1054CP Description
The LT1054CP is a voltage converter featuring switching capacitors and a regulator. It provides a much higher output current and fewer voltage losses than earlier converters. Over a wide range of output currents, an adaptive-switch drive scheme maximizes efficiency. At 100mA output current, the total voltage loss is typically 1.1V. This applies to the entire 3.5 to 15V supply voltage range. The average quiescent current is 2.5mA. In addition, the LT1054 provides regulation, which was previously unavailable in switched-capacitor voltage converters. A regulated output can be obtained by adding an external resistive divider. Both the input voltage and the output current are regulated in this output. By grounding the feedback terminal, the voltage converter can also be turned off. In shutdown, the supply current is normally 100A.
LT1054CP Features
Reference and error amplifier for regulation
External shutdown
External oscillator synchronization
Devices can be paralleled
Devices can be paralleled
Pin-to-pin compatible with LTC1044/7660
LT1054CP Applications
Power Management
Industrial
Test & Measurement
Power Management