LT1057SW#PBF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 16 |
| Power Supplies | +-15V |
| Number of Circuits | 2 |
| Current - Supply | 1.7mA |
| Slew Rate | 13V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 82 dB |
| Current - Input Bias | 7pA |
| Voltage - Supply, Single/Dual (±) | ±10V~18V |
| Input Offset Voltage (Vos) | 2mV |
| Gain Bandwidth Product | 5MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 5000 kHz |
| Voltage Gain | 109.54dB |
| Average Bias Current-Max (IIB) | 0.0001μA |
| Power Supply Rejection Ratio (PSRR) | 86dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 200μV |
| Low-Bias | YES |
| Bias Current-Max (IIB) @25C | 0.0001μA |
| Input Offset Current-Max (IIO) | 0.0004μA |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
LT1057SW#PBF Overview
There is a 16-SOIC (0.295, 7.50mm Width) case package that contains the instrumentation amplifiers. Buffer amps of this type are called J-FET-types. A Tube case is used to deliver the buffer op amp. It is estimated that there will be at least 16 terminations this year. The total number of pins on linear amplifier is 16. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. Instrumentation amplifier is a part of Operational Amplifier. There are 16 pins on this chip. There is an input offset voltage of 2mV for this buffer op amp. Surface Mount is the recommended mounting type for this linear amplifier. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of 0°C~70°C . Keeping the voltage gain at 109.54dB is the best course of action. The buffer amp consists of 2 circuits in total. It is recommended that this electronic component be used with an 1.7mA supply.
LT1057SW#PBF Features
16 Pins
supply voltage of 15V
109.54dB voltage gain
LT1057SW#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1057SW#PBF Instrumentational OP Amps applications.
- Active probe
- Broadcasting
- Computer workstations
- Ultrasound transducers
- PDA
- Laptop
- Test equipment
- Home audio systems
- Weak signal detection
- Digital cameras
