LT1076HVIR#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-8, D2Pak (7 Leads + Tab), TO-263CA |
| Surface Mount | YES |
| Number of Pins | 7 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - with Nickel (Ni) barrier |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Base Part Number | LT1076 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Voltage - Input (Max) | 64V |
| Output Voltage | 50V |
| Output Type | Adjustable |
| Max Output Current | 10A |
| Voltage - Input (Min) | 8V |
| Input Voltage-Nom | 25V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive or Negative |
| Current - Output | 2A Switch |
| Max Output Voltage | 50V |
| Topology | Buck, Boost, Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | 2.5V |
| Voltage - Output (Max) | 35V |
| Height | 3.175mm |
| Length | 10.54mm |
| Width | 10.922mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1076HVIR#PBF Overview
optimized performance is achieved by utilizing the Tube package in this voltage regulator. In this voltage regulator, there are a total of 7 terminations. The type of analog IC that this voltage regulator is equipped with is SWITCHING REGULATOR. Space-saving TO-263-8, D2Pak (7 Leads + Tab), TO-263CA packages are available for this harley voltage regulator. DC DC switching regulator is configured with 1 outputs. Adjusting voltage regulator's output pins generate Adjustable output. A Surface Mount mounting is required for this switching regulator. Keeping dc to dc voltage regulator's operating temperature at -40°C~85°C TA is essential when operating. This voltage regulator 12v reaches a switching frequency of 100kHz. The voltage regulator can be operated with a voltage as low as 8V as an input voltage. As a result of the 2A Switch output current, voltage regulator offers maximum flexibility in design. Voltage regulator's input voltage can reach 64V. A regulator voltage's peak reflow temperature amounts to 250 being indestructible. For operation, voltage regulator provides a nominal input voltage of 25V. This voltage regulator is included in the Switching Regulator or Controllers subcategory. In this case, the DC/DC regulator belongs to the family LT1076. Voltage of voltage regulator can be delivered at 50V volts. There are 7 pins that are used for the operation of the voltage regulator 12v. The output voltage of this voltage regulator 12v should at least be set at 2.5V volts at all times. To meet its operating requirements, dc to dc voltage regulator can deliver a maximum output current of 10A A. Based on the maximal adjusting voltage regulator's output voltage of 35V, adjusting voltage regulator can be operated easily. There is a maximum output voltage of 50V from this voltage regulator 12v.
LT1076HVIR#PBF Features
1 outputs
Peak reflow temperature (Cel) of 250
7 pins
LT1076HVIR#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1076HVIR#PBF Voltage Regulators applications.
- Electrical distribution systems
- Emergency lighting monitoring equipment
- Constant current circuits
- Magnetohydrodynamic power
- Large fire protection systems
- Computer monitoring equipment of building
- Smoke prevention equipment
- Elevator lighting
- Digital display device
- Hydro power
