LT1078S8#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1078 |
| Pin Count | 8 |
| Number of Elements | 2 |
| Power Supplies | 5/+-15V |
| Number of Circuits | 2 |
| Operating Supply Current | 47μA |
| Supply Current-Max | 0.17mA |
| Slew Rate | 0.1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 94 dB |
| Current - Input Bias | 7nA |
| Voltage - Supply, Single/Dual (±) | 2.2V~30V ±1.1V~15V |
| Input Offset Voltage (Vos) | 30μV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 200 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.011μA |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 70μV |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.01μA |
| Nominal Gain Bandwidth Product | 200 kHz |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1078S8#TRPBF Overview
Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. An op amp of this type is a General Purpose-type. A Tape & Reel (TR) case is used to deliver the buffer op amp. In recent months, the number of terminations has approached 8. A total of 8 pins are attached to buffer op amp. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. 8 pins are located on the operational amplifiers. Op amp ic rates 30μV for input offset voltage. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. It is important to note that this linear amplifier works well at a temperature of 0°C~70°C when it comes to operating temperatureThe buffer amplifier is capable of operating from a supply current of 47μA . There should be no change in the voltage gain at 120dB. In total, there are 2 circuits on this buffer amplifier. There are a total of 2 elements in this linear amplifier. The instrumentation amplifier is packed in the form of TAPE AND REEL.
LT1078S8#TRPBF Features
8 Pins
supply voltage of 15V
120dB voltage gain
LT1078S8#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LT1078S8#TRPBF Instrumentational OP Amps applications.
- High gain DC amplifier
- Comparator
- pH (acidity)
- Radar
- Non-polarized electrodes
- Integrator circuits
- Television broadcasting equipment
- Signal filtering
- Automation control systems
- Television
