LT1127CN#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LT1127 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Number of Elements | 4 |
| Power Supplies | +-15V |
| Number of Circuits | 4 |
| Operating Supply Current | 2.6mA |
| Supply Current-Max | 13.6mA |
| Slew Rate | 11V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 106 dB |
| Current - Input Bias | 8nA |
| Voltage - Supply, Single/Dual (±) | ±4V~18V |
| Input Offset Voltage (Vos) | 25μV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 65000 kHz |
| Voltage Gain | 143.52dB |
| Average Bias Current-Max (IIB) | 0.065μA |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Low-Offset | YES |
| Frequency Compensation | YES AVCL>=10 |
| Supply Voltage Limit-Max | 22V |
| Voltage - Input Offset | 30μV |
| Bias Current-Max (IIB) @25C | 0.03μA |
| Neg Supply Voltage-Max (Vsup) | -22V |
| Nominal Gain Bandwidth Product | 65MHz |
| Height Seated (Max) | 3.809mm |
| Length | 19.558mm |
| RoHS Status | ROHS3 Compliant |
LT1127CN#PBF Overview
The linear amplifier is packaged in a 14-DIP (0.300, 7.62mm) case which makes it easy for the consumer to handle. There are two types of operational amplifiers in this circuit. The case in which buffer amplifier is delivered is called a Tube case. There is a growing number of terminations approaching the number of 14. It consists of a total of 14 pins in total. Please take in mind that this instrumentation amplifier should be run at 15V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. An 14-pin op amp ic is included in the package. In terms of input offset voltage, operational amplifier rates 25μV. This electronic component is recommended to be mounted using the mounting type Through Hole. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . You can run this op amp ic on 2.6mA . 143.52dB should remain the voltage gain. This op amp contains 4 circuits. The linear amplifier consists of 4 different elements in total.
LT1127CN#PBF Features
14 Pins
supply voltage of 15V
143.52dB voltage gain
LT1127CN#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1127CN#PBF Instrumentational OP Amps applications.
- Inverse/same-phase proportional circuit
- Integrator circuits
- Thermocouples
- Gaming industry
- Subtraction operation circuits
- Portable electronic products powered by batteries
- Division circuits
- Active probe
- Weighing systems
- Home audio systems
