LT1128ACN8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LT1128 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Operating Supply Current | 7.4mA |
| Slew Rate | 6V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 114 dB |
| Current - Input Bias | 25nA |
| Voltage - Supply, Single/Dual (±) | ±4V~18V |
| Input Offset Voltage (Vos) | 10μV |
| Gain Bandwidth Product | 20MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 20000 kHz |
| Voltage Gain | 149.54dB |
| Power Supply Rejection Ratio (PSRR) | 117dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 22V |
| Bias Current-Max (IIB) @25C | 0.09μA |
| Neg Supply Voltage-Max (Vsup) | -22V |
| Nominal Gain Bandwidth Product | 20MHz |
| Height Seated (Max) | 3.937mm |
| RoHS Status | ROHS3 Compliant |
LT1128ACN8#PBF Overview
A 8-DIP (0.300, 7.62mm) case is used to package the op amp. A General Purpose-type buffer amplifier is shown here. Linear amplifier is delivered in a Tube case. The number of terminations approaches 8. The total number of pins on linear amplifier is 8. Please take in mind that op amp should be run at 15V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. There are 8 pins on this chip. With regard to input offset voltage, instrumentation amplifier is rated at 10μV. For this electrical component, the recommended mounting type is Through Hole, which is the most common. According to the manufacturer, this buffer op amp works well at 0°C~70°C , which is a good operating temperature. Operational amplifier can operate supply current at 7.4mA. There should be no change in the voltage gain. According to the specifications of the buffer op amp, the operating supply voltage is rated at 1.
LT1128ACN8#PBF Features
8 Pins
supply voltage of 15V
149.54dB voltage gain
LT1128ACN8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1128ACN8#PBF Instrumentational OP Amps applications.
- Signal amplification
- Division circuits
- Thermocouples
- E-book readers
- Industrial applications including automation
- Switching amplifier
- Biopotential
- Laptop
- Fast A/D and D/A converters
- Power transmission
