LT1133ACSW#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Technology | BIPOLAR |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1133 |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-232 |
| Nominal Supply Current | 25mA |
| Max Supply Current | 25mA |
| Logic Function | Receiver |
| Data Rate | 250KBd |
| Differential Output | NO |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 3/5 |
| Duplex | Full |
| Receiver Hysteresis | 400mV |
| Number of Drivers | 3 |
| Number of Transceivers | 1 |
| ESD Protection | Yes |
| Receive Delay-Max | 600 ns |
| Number of Receivers | 5 |
| High Level Input Current-Max | 0.00002A |
| Height | 2.34mm |
| Length | 15.6mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1133ACSW#PBF Overview
Driver ICs with enhanced 24-SOIC (0.295, 7.50mm Width) packages are excellent for driving LEDs with common characteristics.The package of this receiver is Tube.With its Transceiver can transceiver design, this part can be incorporated into a wide range of solutions.This wide receiver can be placed on any Surface Mount-type PCB or development board.This differential driver consumes 4.5V~5.5V for its power supplyThe field can have up to 3/5 eligible receivers/drivers at once when using this electronic part.For applications where the operating temperature is 0°C~70°C, this ic receiver was designed primarily.5V is the supply voltage range that this line driver ic can efficiently operate with.In this wide receiver, 24 terminations are integrated for driving and receiving signals from data.ICs that are packaged with market standard pinouts are available on the market.Since the part number LT1133 represents the product type, temperature, package, etc., you can try searching with that number to find more variants.24-pin driver chip with enhanced power dissipation.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.There is a voltage input supply of 5V required for the operation of this integrated circuit.IC5V is a high performance driver IC designed to work with a 5V power supply.Transceivers implemented by this IC total 1 in total.A 5 receiver is included.The part is embedded with 3 drivers, so it can be used with 3 devices.In the case of input current exceeding 25mA, this can transceiver may malfunction.
LT1133ACSW#PBF Features
Tube package
24 pin count
24 pins
5V power supply
LT1133ACSW#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1133ACSW#PBF Drivers/Receivers/Transceivers applications.
- Precision engineering measurement
- transmission relay
- Indoor ad hoc meeting
- Structural bonding
- Copper connection network
- Low power, low voltage systems
- Mainframes, workstations or storage devices
- Single fiber bidirectional application
- Automation systems
- Transmission stations
