LT1158CN#PBF
| Parameters | |
|---|---|
| Turn-Off Delay Time | 550 ns |
| Output Polarity | TRUE |
| Input Characteristics | STANDARD |
| Rise / Fall Time (Typ) | 130ns 120ns |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 500mA 500mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.55 µs |
| High Side Voltage - Max (Bootstrap) | 56V |
| Height | 3.3mm |
| Length | 19.56mm |
| Width | 6.48mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Technology | BIPOLAR |
| Voltage - Supply | 5V~30V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | LT1158 |
| Pin Count | 16 |
| Max Output Current | 500mA |
| Operating Supply Voltage | 12V |
| Max Supply Current | 18mA |
| Input Type | Inverting, Non-Inverting |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 250ns |
| Fall Time (Typ) | 250 ns |
LT1158CN#PBF Overview
For greater flexibility, its 16-DIP (0.300, 7.62mm) package is used.Tube represents the packaging method.A total of 2 drivers are integrated into its configuration.Through Hole is the way in which it is mounted.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 5V~30V supply voltage.This device is designed with a N-Channel MOSFET gate type.Temperature range 0°C~125°C TJ is allowed for this device.Mosfet driver uses Inverting, Non-Inverting as Mosfet drivers input type.Mosfet driver consists of 16 terminations as Mosfet drivers foundation.The base part number LT1158 refers to a number of related parts.During design, it is configured with 16 pins.The device is specifically designed to operate at 12V volts.In the maximum case, the output current can be 500mA volts.This subcategory of MOSFET Drivers has a number of useful electronic components.There are 16 component pins on the board.Ideally, the high-side voltage should not exceed 56V.Keeping the supply current at 18mA ensures greater stability.Setting the operating supply voltage to 12V is recommended.Its input is characterized by STANDARD.
LT1158CN#PBF Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel MOSFET
16 pins
High-side voltage - Max (Bootstrap) of 56V
LT1158CN#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1158CN#PBF gate drivers applications.
- Digitally controlled power supplies
- Telecom switch mode power supplies
- Motor Drives
- Active filtering
- Uninterruptible Power Supplies (UPS)
- Industrial Modules
- Portable computers
- General Purpose 3-Phase Inverter
- Dual-Battery Systems
- High power buffers
