LT1158IN#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Technology | BIPOLAR |
| Voltage - Supply | 5V~30V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | LT1158 |
| Pin Count | 16 |
| Max Output Current | 500mA |
| Operating Supply Voltage | 12V |
| Max Supply Current | 18mA |
| Input Type | Inverting, Non-Inverting |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 250ns |
| Fall Time (Typ) | 250 ns |
| Turn-Off Delay Time | 550 ns |
| Output Polarity | TRUE |
| Input Characteristics | STANDARD |
| Rise / Fall Time (Typ) | 130ns 120ns |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 500mA 500mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.55 µs |
| High Side Voltage - Max (Bootstrap) | 56V |
| Height | 3.3mm |
| Length | 19.56mm |
| Width | 6.48mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1158IN#PBF Overview
Gate drivers provides greater flexibilGate driversy to use the 16-DIP (0.300, 7.62mm) package.There is a package in the form of Tube.2 drivers are incorporated for its configuration.Gate drivers is mounted in the way of Through Hole.In the absence of a 5V~30V supply voltage, its superiority can be demonstrated.A gate type of N-Channel MOSFET has been used in its design.This device allows temperatures in the range of -40°C~150°C TJ.Inverting, Non-Inverting is used as the input type in this program.Its configuration is based on a total of 16 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number LT1158.During design, it is configured with 16 pins.The device is specifically designed to operate at 12V volts.As a maximum, there is 500mA limit to the output current.Within this subcategory of MOSFET Drivers, there are several useful electronic components.The board has a total of 16 component pins.High-side voltage - Max (Bootstrap) can be as low as 56V.The supply current should be kept at 18mA to ensure higher stability.A voltage of 12V should be set for the operating supply voltage.STANDARD is its input.
LT1158IN#PBF Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel MOSFET
16 pins
High-side voltage - Max (Bootstrap) of 56V
LT1158IN#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1158IN#PBF gate drivers applications.
- Industrial Modules
- Broadcast equipment
- Digitally controlled power supplies
- DC-DC Converters
- Active Clamp Flyback or Forward and Synchronous Rectifier
- 3-Phase Motor Inverter Driver
- Welding
- Isolated switch mode power supplies (SMPS)
- DC/DC converters
- Motor controllers
