LT1160CN#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Technology | BIPOLAR |
| Voltage - Supply | 10V~15V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LT1160 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 12V |
| Input Type | Non-Inverting |
| Turn On Delay Time | 500 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 200ns |
| Fall Time (Typ) | 140 ns |
| Turn-Off Delay Time | 600 ns |
| Output Polarity | TRUE |
| Input Characteristics | SCHMITT TRIGGER |
| Rise / Fall Time (Typ) | 130ns 60ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.5 µs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.6 µs |
| High Side Voltage - Max (Bootstrap) | 60V |
| Height Seated (Max) | 3.809mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1160CN#PBF Overview
A higher level of flexibility is provided by its 14-DIP (0.300, 7.62mm) package.There is a package in the form of Tube.Configuration is based on 2 drivers.In the direction of Through Hole, gate drivers is mounted.A supply voltage of 10V~15V demonstrates its superiority.There is a gate type of N-Channel MOSFET in this design.This device is allowed to operate in a temperature range of 0°C~125°C TJ.Non-Inverting is used as the input type.Its configuration starts with 14 terminations.Under its base part number LT1160, various related parts can be found.At the time of design, it is configured with 14 pins.A voltage of 12V is required for its operation.In the maximum case, the output current can be limited to 1.5A.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.A board with 14 component pins is available.Ideally, the high-side voltage should not exceed 60V.Mosfet gate drivers is recommended that the operating supply voltage be set to 12V.SCHMITT TRIGGER represents its input.
LT1160CN#PBF Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel MOSFET
14 pins
High-side voltage - Max (Bootstrap) of 60V
LT1160CN#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1160CN#PBF gate drivers applications.
- Video amplifiers
- Isolated switch mode power supplies (SMPS)
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Motor Drives
- serial peripheral interface (SPI), I2C
- Active filtering
- Uninterruptible Power Supplies (UPS)
- DC-DC Converters
- Multicolor LED/laser displays
- Motor controllers
