LT1160IN#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Technology | BIPOLAR |
| Voltage - Supply | 10V~15V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LT1160 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 12V |
| Input Type | Non-Inverting |
| Turn On Delay Time | 500 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 200ns |
| Fall Time (Typ) | 140 ns |
| Turn-Off Delay Time | 600 ns |
| Output Polarity | TRUE |
| Input Characteristics | SCHMITT TRIGGER |
| Rise / Fall Time (Typ) | 130ns 60ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.5 µs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.6 µs |
| High Side Voltage - Max (Bootstrap) | 60V |
| Height Seated (Max) | 3.809mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1160IN#PBF Overview
There is greater flexibility with the 14-DIP (0.300, 7.62mm) package.Tube is the packaging method.2 drivers are incorporated for its configuration.In the direction of Through Hole, gate drivers is mounted.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 10V~15V supply voltage.Gate type N-Channel MOSFET is designed for it.-40°C~125°C TJ is the allowed temperature range for this device.The input type is Non-Inverting.Mosfet driver consists of 14 terminations as Mosfet drivers foundation.The base part number LT1160 refers to a number of related parts.During design, it is configured with 14 pins.A voltage of 12V is required for its operation.Mosfet driver is possible for the output current to be as low as 1.5A.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.The board contains 14 pins for component connections.The high-side voltage - Max (Bootstrap) can be up to 60V.Mosfet gate drivers is recommended that the operating voltage of the supply be set at 12V.The input of this algorithm is characterized by SCHMITT TRIGGER.
LT1160IN#PBF Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel MOSFET
14 pins
High-side voltage - Max (Bootstrap) of 60V
LT1160IN#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1160IN#PBF gate drivers applications.
- High-speed communications
- Line drivers
- Motor Control
- Industrial Modules
- Motor controllers
- Topologies
- PCMCIA applications
- Video amplifiers
- Portable computers
- RGB applications
