LT1160IS#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Technology | BIPOLAR |
| Voltage - Supply | 10V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1160 |
| Pin Count | 14 |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 12V |
| Input Type | Non-Inverting |
| Turn On Delay Time | 500 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 200ns |
| Fall Time (Typ) | 140 ns |
| Turn-Off Delay Time | 600 ns |
| Output Polarity | TRUE |
| Input Characteristics | SCHMITT TRIGGER |
| Rise / Fall Time (Typ) | 130ns 60ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.5 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.6 μs |
| High Side Voltage - Max (Bootstrap) | 60V |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1160IS#PBF Overview
A higher level of flexibility is provided by its 14-SOIC (0.154, 3.90mm Width) package.A package of Tube has been used.Configuration is based on 2 drivers.Surface Mount is the way in which it is mounted.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 10V~15V supply voltage.Gate type N-Channel MOSFET has been used in its design.Mosfet driver is possible to use this device at temperatures as low as -40°C~125°C TJ.The input type for this program is Non-Inverting.Mosfet driver is based on 14 terminations.The base part number LT1160 refers to a number of related parts.Mosfet driver is configured wMosfet driverh 14 pins when designing.A supply voltage of 12V is required for operation.As a maximum, there is 1.5A limit to the output current.There are several useful electronic components found in its subcategory of MOSFET Drivers.The board has a total of 14 component pins.Maximum (Bootstrap) voltage is 60V.During the operation of the system, the voltage of the operating supply should be set to 12V.The input of this algorithm is characterized by SCHMITT TRIGGER.
LT1160IS#PBF Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel MOSFET
14 pins
High-side voltage - Max (Bootstrap) of 60V
LT1160IS#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1160IS#PBF gate drivers applications.
- serial peripheral interface (SPI), I2C
- Isolated switch mode power supplies (SMPS)
- Digitally controlled power supplies
- General Purpose 3-Phase Inverter
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Portable Navigation Devices
- Commercial and agricultural vehicles (CAV)
- Dual-Battery Systems
- AC-DC Inverters
- White Goods - Air Conditioner, Washing Machine,
