LT1162ISW#PBF
| Parameters | |
|---|---|
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.6 μs |
| High Side Voltage - Max (Bootstrap) | 60V |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Technology | BIPOLAR |
| Voltage - Supply | 10V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1162 |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 12V |
| Input Type | Non-Inverting |
| Turn On Delay Time | 500 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 200ns |
| Fall Time (Typ) | 140 ns |
| Turn-Off Delay Time | 600 ns |
| Output Polarity | TRUE |
| Input Characteristics | SCHMITT TRIGGER |
| Rise / Fall Time (Typ) | 130ns 60ns |
| Interface IC Type | FULL BRIDGE BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 4 |
| Turn On Time | 0.5 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Half-Bridge |
LT1162ISW#PBF Overview
There is greater flexibility with the 24-SOIC (0.295, 7.50mm Width) package.Gate drivers is packaged in the way of Tube.The configuration is supported by 4 drivers.Surface Mount is mounted in the way of the device.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 10V~15V.There is a gate type of N-Channel MOSFET in this design.Temperature range -40°C~125°C TJ is allowed for this device.Non-Inverting is used as the input type.It's configured with 24 terminations.Under its base part number LT1162, various related parts can be found.The pins are configured with 24 when designing the chip.Specification is for 12V supply voltage operation.Its interface IC is FULL BRIDGE BASED MOSFET DRIVER.1.5A is the maximum output current.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.The board has 24 component pins.A high-side voltage can be set up to 60V (Bootstrap).As a rule of thumb, the operating supply voltage should be set to 12V.Mosfet gate drivers receives an input of SCHMITT TRIGGER.
LT1162ISW#PBF Features
Embedded in the Tube package
4 drivers
Employing a gate type of N-Channel MOSFET
24 pins
High-side voltage - Max (Bootstrap) of 60V
LT1162ISW#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1162ISW#PBF gate drivers applications.
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Solar inverters
- PCMCIA applications
- Solar power supplies
- AC-DC Inverters
- LCD/LCoS/DLP portable and embedded pico projectors
- Motor Control
- Commercial air-conditioning (CAC)
- RGB applications
- Multicolor LED/laser displays
