LT1167ACN8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 1 TΩ |
| Terminal Finish | Matte Tin (Sn) |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | LT1167 |
| Pin Count | 8 |
| Number of Elements | 3 |
| Number of Circuits | 1 |
| Operating Supply Current | 900μA |
| Slew Rate | 1.2V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 50pA |
| Voltage - Supply, Single/Dual (±) | 4.6V~36V ±2.3V~18V |
| Output Current per Channel | 27mA |
| Input Offset Voltage (Vos) | 15μV |
| Gain Bandwidth Product | 1MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Average Bias Current-Max (IIB) | 0.00045μA |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Supply Voltage Limit-Max | 20V |
| -3db Bandwidth | 1MHz |
| Neg Supply Voltage-Max (Vsup) | -20V |
| Nominal Gain Bandwidth Product | 1MHz |
| Input Offset Current-Max (IIO) | 0.0004μA |
| Voltage Gain-Min | 1 |
| Voltage Gain-Nom | 10 |
| Non-linearity-Max | 0.006% |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1167ACN8#PBF Overview
Packaging for the buffer amplifier is in the form of a 8-DIP (0.300, 7.62mm) case. Instrumentation-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tube case. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. Please take in mind that this instrumentation amplifier should be run at 15V. The buffer op amp includes 8 pins. In terms of the input offset voltage, instrumentation amplifier rates at 15μV. The mounting type that is recommended for this electrical part is Through Hole. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about 0°C~70°C . As long as the supply current of the chip does not exceed 900μA, this op amp ic can operate. There are 1 circuits on this op amp. The op amp is rated for an operating supply voltage of 3. There are a maximum of 1 voltage gains that can be conducted by this operational amplifier at its minimum voltage gain. It is important to keep the resistance within the 1 TΩ range of the op amps.
LT1167ACN8#PBF Features
8 Pins
supply voltage of 15V
Resistance of 1 TΩ
LT1167ACN8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1167ACN8#PBF Instrumentational OP Amps applications.
- Information processing
- Medical imaging
- Automotive sensors
- Portable media players
- Medical instruments
- Home audio systems
- Large motor controllers
- Video amplifiers
- Fast A/D and D/A converters
- Mobile phone
