LT1167ACS8-1#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 1 TΩ |
| Terminal Finish | Matte Tin (Sn) |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1167 |
| Pin Count | 8 |
| Number of Elements | 3 |
| Number of Circuits | 1 |
| Operating Supply Current | 900μA |
| Slew Rate | 1.2V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 50pA |
| Voltage - Supply, Single/Dual (±) | 4.6V~36V ±2.3V~18V |
| Output Current per Channel | 27mA |
| Input Offset Voltage (Vos) | 15μV |
| Gain Bandwidth Product | 1MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Average Bias Current-Max (IIB) | 0.00045μA |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Supply Voltage Limit-Max | 20V |
| -3db Bandwidth | 1MHz |
| Neg Supply Voltage-Max (Vsup) | -20V |
| Nominal Gain Bandwidth Product | 1MHz |
| Input Offset Current-Max (IIO) | 0.0004μA |
| Voltage Gain-Min | 1 |
| Voltage Gain-Nom | 10 |
| Non-linearity-Max | 0.006% |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1167ACS8-1#PBF Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. An op amp of this type is a Instrumentation-type. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. It is estimated that there will be 8 terminations in the next few months. A total of 8 pins are located on this board. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. An 8-pin op amp ic is included in the package. There is an input offset voltage of 15μV for this buffer op amp. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. It is important to note that this linear amplifier works well at a temperature of 0°C~70°C when it comes to operating temperatureA supply current of 900μA can be used to operate this linear amplifier. During the manufacturing process, this buffer amplifier is divided into 1 circuits. The buffer op amp is rated for an operating voltage of 3 when it comes to the power supply. The minimum voltage gain this buffer op amp is able to conduct is 1. Instrumentation amplifier resistance should remain within the range of 1 TΩ.
LT1167ACS8-1#PBF Features
8 Pins
supply voltage of 15V
Resistance of 1 TΩ
LT1167ACS8-1#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1167ACS8-1#PBF Instrumentational OP Amps applications.
- Switching amplifier
- Instrumentation
- Video computer boards
- Power control
- E-book readers
- Ultrasound transducers
- Gaming industry
- Fission chambers
- Semiconductor detectors
- Large motor controllers
