LT1167ACS8-1#TRPBF

1 Channels 27mA per Channel 50pA 90 dB Instrumentational OP Amps SOIC

Manufacturer: Analog Devices, Inc.
Nocochips NO: 84-LT1167ACS8-1#TRPBF
Package: SOIC
Datasheet: PDF
Stock: 240
Description: 1 Channels 27mA per Channel 50pA 90 dB Instrumentational OP Amps SOIC(Kg)

Details

Tags

Parameters
Lifecycle Status	PRODUCTION (Last Updated: 3 months ago)
Package / Case	SOIC
Number of Pins	8
Resistance	1 TΩ
Max Operating Temperature	70°C
Min Operating Temperature	0°C
Number of Elements	3
Number of Channels	1
Number of Circuits	1
Max Supply Voltage	40V
Min Supply Voltage	4.6V
Operating Supply Current	900μA
Slew Rate	1.2 V/μs
Common Mode Rejection Ratio	90 dB
Current - Input Bias	50pA
Output Current per Channel	27mA
Input Offset Voltage (Vos)	15μV
Gain Bandwidth Product	1MHz
Power Supply Rejection Ratio (PSRR)	105dB
Max Dual Supply Voltage	18V
Min Dual Supply Voltage	2.3V
Nominal Gain Bandwidth Product	1MHz
RoHS Status	RoHS Compliant

LT1167ACS8-1#TRPBF Overview

Op amp is packaged in SOIC case. A total of 8 pins are present on the instrumentation amplifier. The input offset voltage is 15μV. As long as the supply current of the chip does not exceed 900μA, this op amp ic can operate. On this instrumentation amplifier, there are 1 circuits that are connected together. As far as the device is concerned, buffer amplifier has 1 channels. The temperature should not be lower than 0°C for operational amplifier ics to operate. It is recommended that op amp be used at temperatures below 70°C. It is possible to count 3 elements on this buffer amplifier. With regard to the supply voltage, this electrical component is capable of working from under 40V. Over 4.6V is a recommended supply voltage for buffer ampsIn order for this electronic part to be conducted successfully, you should use a dual supply voltage of 18V. It is important that the linear amplifier resistance stays within the range of 1 TΩ.