LT1167AIS8-1#PBF
| Parameters | |
|---|---|
| Voltage Gain-Nom | 10 |
| Non-linearity-Max | 0.007% |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 1 TΩ |
| Terminal Finish | Matte Tin (Sn) |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1167 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Elements | 3 |
| Number of Circuits | 1 |
| Operating Supply Current | 900μA |
| Slew Rate | 1.2V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 50pA |
| Voltage - Supply, Single/Dual (±) | 4.6V~36V ±2.3V~18V |
| Output Current per Channel | 27mA |
| Input Offset Voltage (Vos) | 15μV |
| Gain Bandwidth Product | 1MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Average Bias Current-Max (IIB) | 0.0006μA |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Supply Voltage Limit-Max | 20V |
| -3db Bandwidth | 1MHz |
| Neg Supply Voltage-Max (Vsup) | -20V |
| Nominal Gain Bandwidth Product | 1MHz |
| Input Offset Current-Max (IIO) | 0.00055μA |
| Voltage Gain-Min | 1 |
LT1167AIS8-1#PBF Overview
Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. Op amps are Instrumentation types of amplifier on the chip. There is a Tube case that is delivered with the instrumentation amplifiers. The number of terminations approaches 8. It consists of a total of 8 pins in total. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. Linear amplifier includes 8 pins. The input offset voltage is 15μV. For this electrical component, Surface Mount is the recommended mounting type. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . As long as the supply current of the chip does not exceed 900μA, this op amp ic can operate. There are 1 circuits on this op amp. The op amp is rated for an operating supply voltage of 3. It is necessary to keep in mind that this instrumentation amplifier is able to conduct a minimum voltage gain of 1. It is important that the linear amplifier resistance stays within the range of 1 TΩ.
LT1167AIS8-1#PBF Features
8 Pins
supply voltage of 15V
Resistance of 1 TΩ
LT1167AIS8-1#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1167AIS8-1#PBF Instrumentational OP Amps applications.
- Non-polarized electrodes
- Home audio systems
- Subtraction operation circuits
- Hand-held batteries
- Multiplication circuits
- E-book readers
- Video computer boards
- Television
- Video data acquisition
- Image computer boards
