LT1167IN8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 1 TΩ |
| Terminal Finish | Matte Tin (Sn) |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LT1167 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Elements | 3 |
| Number of Circuits | 1 |
| Operating Supply Current | 900μA |
| Slew Rate | 1.2V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 85 dB |
| Current - Input Bias | 80pA |
| Voltage - Supply, Single/Dual (±) | 4.6V~36V ±2.3V~18V |
| Output Current per Channel | 27mA |
| Input Offset Voltage (Vos) | 15μV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Supply Voltage Limit-Max | 20V |
| Voltage - Input Offset | 20μV |
| -3db Bandwidth | 1MHz |
| Neg Supply Voltage-Max (Vsup) | -20V |
| Nominal Gain Bandwidth Product | 1MHz |
| Input Offset Current-Max (IIO) | 0.0007μA |
| Voltage Gain-Min | 1 |
| Voltage Gain-Nom | 10 |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1167IN8#PBF Overview
In the package, you will find a 8-DIP (0.300, 7.62mm)-case to contain the op amp ic. Op amps are Instrumentation types of amplifier on the chip. There is a Tube case that is delivered with the instrumentation amplifiers. During the past two weeks, there have been close to 8 terminations. In this case, there are 8 pins on the board. Please take in mind that this instrumentation amplifier should be run at 15V. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 15μV for this buffer op amp. This electronic part is best mounted with type Through Hole. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . It is possible to operate this buffer amplifier from a supply current of 900μA . A linear amplifier like this has 1 circuits on it. For the operating supply voltage of the op amp ic, there is a rating of 3. This op amp ic is capable of conducting at least 1 voltage gains. In order for the op amp resistance to remain within the 1 TΩ range, the op amp should be tested.
LT1167IN8#PBF Features
8 Pins
supply voltage of 15V
Resistance of 1 TΩ
LT1167IN8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1167IN8#PBF Instrumentational OP Amps applications.
- Signal operation
- Polarized electrodes
- Vehicle electronics
- Precision measurement
- Semiconductor detectors
- Instrumentation
- ECG equipment
- Fast A/D and D/A converters
- Signal amplification
- Commercial audio systems
