LT1167IS8-1#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 1 TΩ |
| Terminal Finish | Matte Tin (Sn) |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LT1167 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Elements | 3 |
| Number of Circuits | 1 |
| Operating Supply Current | 900μA |
| Slew Rate | 1.2V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 85 dB |
| Current - Input Bias | 80pA |
| Voltage - Supply, Single/Dual (±) | 4.6V~36V ±2.3V~18V |
| Output Current per Channel | 27mA |
| Input Offset Voltage (Vos) | 15μV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Average Bias Current-Max (IIB) | 0.0006μA |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Supply Voltage Limit-Max | 20V |
| Voltage - Input Offset | 20μV |
| -3db Bandwidth | 1MHz |
| Neg Supply Voltage-Max (Vsup) | -20V |
| Nominal Gain Bandwidth Product | 1MHz |
| Input Offset Current-Max (IIO) | 0.00055μA |
| Voltage Gain-Min | 1 |
| Voltage Gain-Nom | 10 |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
LT1167IS8-1#PBF Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. There are two types of operational amplifiers in this circuit. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. The number of terminations approaches 8. There are a total of 8 pins on this op amp. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. The op amp ic has an array of 8 pins on it. In terms of input offset voltage, operational amplifier rates 15μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~85°C. You can run this op amp ic on 900μA . During the manufacturing process, this buffer amplifier is divided into 1 circuits. 3 elements make up the design of this buffer amplifier. To conduct electronic part voltage gain higher than 1. During testing, the instrumentation amplifier resistance should remain within a range of 1 TΩ.
LT1167IS8-1#PBF Features
8 Pins
supply voltage of 15V
Resistance of 1 TΩ
LT1167IS8-1#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1167IS8-1#PBF Instrumentational OP Amps applications.
- Gaming industry
- Scintillation detectors
- E-book readers
- Car stereo
- Test equipment
- Communication
- single/dual op amp sum and difference circuits
- Strain gauges
- Proportional operation circuits
- Cinema or auditorium audio system
