LT1168IS8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 1.25 TΩ |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1168 |
| Pin Count | 8 |
| Number of Elements | 1 |
| Number of Circuits | 1 |
| Operating Supply Current | 350μA |
| Slew Rate | 0.5V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 85 dB |
| Current - Input Bias | 80pA |
| Voltage - Supply, Single/Dual (±) | 4.6V~36V ±2.3V~18V |
| Output Current per Channel | 32mA |
| Input Offset Voltage (Vos) | 15μV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Supply Voltage Limit-Max | 20V |
| Voltage - Input Offset | 20μV |
| -3db Bandwidth | 0.4MHz |
| Neg Supply Voltage-Max (Vsup) | -20V |
| Nominal Gain Bandwidth Product | 400 kHz |
| Input Offset Current-Max (IIO) | 0.0007μA |
| Voltage Gain-Min | 1 |
| Voltage Gain-Nom | 10 |
| Length | 4.9025mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1168IS8#PBF Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. The instrumentation amplifier in this picture is of the Instrumentation-type. There is a Tube case that is delivered with the instrumentation amplifiers. There have been a total of 8 terminations over the past year. It consists of a total of 8 pins in total. Please take in mind that this instrumentation amplifier should be run at 15V. There are 8 pins on this chip. With regard to input offset voltage, instrumentation amplifier is rated at 15μV. For this electrical component, Surface Mount is the recommended mounting type. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . This op amp can operate from a supply current at 350μA. This op amp ic has 1 circuits. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 1. This operational amplifier can conduct a voltage gain of up to 1 at a minimum. In order for the op amp resistance to remain within the 1.25 TΩ range, the op amp should be tested.
LT1168IS8#PBF Features
8 Pins
supply voltage of 15V
Resistance of 1.25 TΩ
LT1168IS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1168IS8#PBF Instrumentational OP Amps applications.
- Integrator circuits
- Non-polarized electrodes
- Differentiator circuits
- High gain DC amplifier
- Voltage regulation circuit
- Television
- Ultrasound transducers
- Video computer boards
- Addition operation circuits
- Computer workstations
