LT1171HVCT#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Through Hole |
| Package / Case | TO-220-5 Formed Leads |
| Surface Mount | NO |
| Number of Pins | 5 |
| Operating Temperature | 0°C~100°C TJ |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | ZIG-ZAG |
| Base Part Number | LT1171 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Voltage - Input (Max) | 60V |
| Output Voltage | 60V |
| Output Type | Adjustable |
| Max Output Current | 2.5A |
| Voltage - Input (Min) | 3V |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive or Negative |
| Current - Output | 2.5A Switch |
| Quiescent Current | 50μA |
| Max Output Voltage | 75V |
| Topology | Buck, Boost, Cuk, Flyback, Forward Converter |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 9mA |
| Synchronous Rectifier | No |
| Min Output Voltage | 1.244V |
| Voltage - Output (Max) | 75V Switch |
| Max Output Power | 100W |
| Height | 15.748mm |
| Length | 10.54mm |
| Width | 4.572mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1171HVCT#PBF Overview
A Tube package is used in this voltage regulator to optimize performance. In this voltage regulator, 5 terminations are present. There are two types of analog ICs in this voltage regulator 12v: SWITCHING REGULATOR ICs, which are the ones used in older voltage regulator 12vs. Space-saving TO-220-5 Formed Leads packages are available for this harley voltage regulator. 1 outputs have been configured in the voltage regulator 12v. DC DC switching regulators like this one generate Adjustable outputs on their output pins to handle the power management. This switching regulator is designed to fit the Through Hole mounting system. Operating at 0°C~100°C TJ is the recommended temperature for adjusting voltage regulator's operation. Voltage regulator's switching frequency reaches 100kHz. Input voltage 3V is the dc to dc voltage regulator's minimum input voltage required for operation of the voltage regulators. DC DC switching regulator's maximum design flexibility comes from its output current of 2.5A Switch. As far as the voltage input is concerned, DC DC switching regulator can accept up to 60V. Voltage regulator is designed to provide a nominal input voltage of 15V to meet the operation requirements. DC DC switching regulator is part of the Switching Regulator or Controllers subcategory and can be found in the Switching Regulator or Controllers category. LT1171 is a family of voltage regulators that belong to the DC/DC industry. At 60V volts, voltage regulator can provide voltage. In order to operate voltage regulator, there are 5 pins that must be connected. In order for this switching regulator to work properly, the output voltage should be at least 1.244VV. The maximum output current reaches 2.5A A to meet the switching regulator operation requirements. By using 75V Switch as the maximum output voltage, adjusting voltage regulator is easy to operate. The maximum output voltage of this regulator voltage is 75V. Voltage regulator consumes 50μA A of quiescent current without being affected by outside forces.
LT1171HVCT#PBF Features
1 outputs
5 pins
LT1171HVCT#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1171HVCT#PBF Voltage Regulators applications.
- Electrical distribution systems
- Program control systems
- Game consoles
- Automation technology
- Radio equipment
- Correction machines
- Computed tomography (CT)
- Wind power
- Smart grid
- Domestic water pumps
