Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 1 week ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Packaging |
Tube |
Published |
2001 |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
Termination |
SMD/SMT |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
Applications |
General Purpose |
Subcategory |
Operational Amplifier |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
LT1190 |
Pin Count |
8 |
Power Supplies |
5/+-5V |
Temperature Grade |
COMMERCIAL |
Number of Channels |
1 |
Operating Supply Current |
32mA |
Output Current |
50mA |
Slew Rate |
450V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
OPERATIONAL AMPLIFIER |
Common Mode Rejection Ratio |
55 dB |
Voltage - Supply, Single/Dual (±) |
4.75V~16V ±2.38V~8V |
Output Current per Channel |
50mA |
Input Offset Voltage (Vos) |
3mV |
Bandwidth |
50MHz |
Gain Bandwidth Product |
47MHz |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Unity Gain BW-Nom |
50000 kHz |
Voltage Gain |
76.9dB |
Average Bias Current-Max (IIB) |
2.5μA |
Power Supply Rejection Ratio (PSRR) |
60dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
9V |
Bias Current-Max (IIB) @25C |
2.5μA |
Input Bias Current |
1.5μA |
Neg Supply Voltage-Max (Vsup) |
-9V |
Nominal Gain Bandwidth Product |
50MHz |
Length |
4.9mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
LT1190CS8#PBF Overview
A Tube is used to package class d amplifier.In order to save space, class d amp is included in the package 8-SOIC (0.154, 3.90mm Width).Its high performance makes it an excellent choice for General Purpose.A Surface Mount mounting method is used to connect audio power amplifier to the PCB.The part has a base part number of LT1190 for audio amp.A pin count of 8 can be found on audio digital amplifier.8 terminations are present in digital amplifier.A copy of this audio power amplifier can be found in Operational Amplifier.A 32mA supply current is used for operation.8 pins are used to construct amplifier ic.In order to operate properly, the temperature must be below 70°C.Operating temperatures should not fall below 0°C.The number of available channels is currently 1.The 5V supply voltage enables high efficiency.This audio amplifier is equipped with a type OPERATIONAL AMPLIFIER amplifier.There is 50mA output current in this scenario.This audio amplifier ic gains a voltage of 76.9dB when it is powered up.
LT1190CS8#PBF Features
Operational Amplifier subcategory
8 pins
1 channels
LT1190CS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1190CS8#PBF Video Amps and Modules applications.
- High-Fidelity (HiFi) Headphone Drivers
- Automotive head unit
- Microphone Preamplifiers
- Emergency call (eCall)
- Car Audio
- Audio Test And Measurement
- Automotive
- Telematics control unit
- Set-Top Box
- Professional Audio Equipment