LT1191CN8
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Packaging | Tube |
| Published | 2001 |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Applications | General Purpose |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LT1191 |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 70°C |
| Power Supplies | 5/+-5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Current - Supply | 32mA |
| Slew Rate | 450V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 4.75V~16V ±2.38V~8V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 90000 kHz |
| Average Bias Current-Max (IIB) | 2.5μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 9V |
| Current - Output / Channel | 50mA |
| Bias Current-Max (IIB) @25C | 2.5μA |
| Neg Supply Voltage-Max (Vsup) | -9V |
| Input Offset Voltage-Max | 6000μV |
| Wideband | YES |
| Voltage Gain-Min | 20000 |
| Common-mode Reject Ratio-Min | 60 dB |
| Height Seated (Max) | 3.937mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
LT1191CN8 Overview
There is a Tube package attached to class d amplifier.As a space saver, class d amp is accessible from the 8-DIP (0.300, 7.62mm) package.Because of audio amplifiers high performance, audio amplifier is an excellent choice for General Purpose.Using the Through Hole method, audio power amplifier is mounted on the PCB.With 1 circuits, audio ic has enhanced flexibility.The base part number is LT1191 and is used to audio amp.There are 8 pins on audio digital amplifier.There are 8 terminations in digital amplifier.With 32mA current, digital sound amp is powered.It is included in Operational Amplifier.Using a voltage of 5V allows high efficiency.It is recommended to keep the operating temperature below 70°C.Audio amplifiers with OPERATIONAL AMPLIFIER amplifier types are supported.
LT1191CN8 Features
Operational Amplifier subcategory
LT1191CN8 Applications
There are a lot of Linear Technology/Analog Devices LT1191CN8 Video Amps and Modules applications.
- Analog and Digital Mixing Consoles
- Emergency call (eCall)
- High-End A/V Receivers
- Audio Test and Measurement
- External Audio Amplifiers
- Analog and Digital Mixing Consoles
- Preamplification and Filtering
- Professional Audio Equipment
- Telematics control unit
- Automotive active noise cancellation
