Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 1 month ago) |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm) |
Surface Mount |
NO |
Number of Pins |
8 |
Packaging |
Tube |
Published |
2001 |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
Applications |
General Purpose |
Subcategory |
Operational Amplifier |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
2.54mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
LT1191 |
Pin Count |
8 |
Qualification Status |
Not Qualified |
Number of Elements |
1 |
Power Supplies |
5/+-5V |
Temperature Grade |
COMMERCIAL |
Operating Supply Current |
32mA |
Slew Rate |
450V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
OPERATIONAL AMPLIFIER |
Common Mode Rejection Ratio |
55 dB |
Voltage - Supply, Single/Dual (±) |
4.75V~16V ±2.38V~8V |
Output Current per Channel |
50mA |
Input Offset Voltage (Vos) |
1mV |
Gain Bandwidth Product |
80MHz |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Unity Gain BW-Nom |
90000 kHz |
Voltage Gain |
79.08dB |
Average Bias Current-Max (IIB) |
2.5μA |
Power Supply Rejection Ratio (PSRR) |
60dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
9V |
Bias Current-Max (IIB) @25C |
2.5μA |
Input Bias Current |
1.5μA |
Neg Supply Voltage-Max (Vsup) |
-9V |
Nominal Gain Bandwidth Product |
90MHz |
Wideband |
YES |
Height Seated (Max) |
3.937mm |
RoHS Status |
ROHS3 Compliant |
LT1191CN8#PBF Overview
In the form of a Tube, class d amplifier is packaged.For the sake of reducing space, class d amp is accessible in the 8-DIP (0.300, 7.62mm) package.It is a very good choice for General Purpose due to its high performance.Mounting audio power amplifier on the PCB is done using the Through Hole method.It has a base part number of LT1191 that can be used to audio amp.8 pins are present on audio digital amplifier.A 8 termination is present on digital amplifier.The audio power amplifier is included in Operational Amplifier.Audio amplifier is powered by 32mA supply current.Amplifier ic is constructed using 8 pins.Operating temperatures must be lower than 70°C.Ideally, the operating temperature should be 0°C.The 5V supply voltage enables high efficiency.The audio amplifier owns OPERATIONAL AMPLIFIER amplifier type.There is a voltage gain of 79.08dB in the audio amplifier ic.There are 1 elements in total.
LT1191CN8#PBF Features
Operational Amplifier subcategory
8 pins
LT1191CN8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1191CN8#PBF Video Amps and Modules applications.
- General-Purpose Amplifier Applications
- Professional Audio Equipment
- Microphone Preamplifiers
- Aftermarket telematics
- Telematics control unit
- Analog and Digital Mixing Consoles
- Automotive
- Audio Test And Measurement
- External Audio Amplifiers
- Set-Top Box