Parameters |
Min Operating Temperature |
0°C |
Applications |
General Purpose |
Subcategory |
Operational Amplifier |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
LT1191 |
Pin Count |
8 |
Qualification Status |
Not Qualified |
Power Supplies |
5/+-5V |
Temperature Grade |
COMMERCIAL |
Number of Channels |
1 |
Operating Supply Current |
32mA |
Output Current |
50mA |
Slew Rate |
450V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
OPERATIONAL AMPLIFIER |
Common Mode Rejection Ratio |
55 dB |
Voltage - Supply, Single/Dual (±) |
4.75V~16V ±2.38V~8V |
Output Current per Channel |
50mA |
Input Offset Voltage (Vos) |
1mV |
Bandwidth |
90MHz |
Gain Bandwidth Product |
80MHz |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Unity Gain BW-Nom |
90000 kHz |
Voltage Gain |
79.08dB |
Average Bias Current-Max (IIB) |
2.5μA |
Power Supply Rejection Ratio (PSRR) |
60dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
9V |
Bias Current-Max (IIB) @25C |
2.5μA |
Input Bias Current |
1.5μA |
Neg Supply Voltage-Max (Vsup) |
-9V |
Nominal Gain Bandwidth Product |
90MHz |
Length |
4.9mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 1 week ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Packaging |
Tube |
Published |
2001 |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
Termination |
SMD/SMT |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Max Operating Temperature |
70°C |
LT1191CS8#PBF Overview
A Tube is used to package class d amplifier.As a space saver, class d amp is accessible from the 8-SOIC (0.154, 3.90mm Width) package.It is an excellent choice for General Purpose due to audio amplifiers high performance.Using the Surface Mount method, audio power amplifier is mounted on the PCB.The part has a base part number of LT1191 for audio amp.The number of pins is 8.Digital amplifier consists of 8 terminations.This audio power amplifier is included in Operational Amplifier.Audio amplifier is powered by 32mA supply current.Amplifier ic is constructed using 8 pins.It is recommended to operate at a temperature below 70°C.It is recommended that the operating temperature is at least 0°C.It is currently possible to access a total of 1 channels.With a 5V supply voltage, high efficiency can be achieved.Its amplifier type is OPERATIONAL AMPLIFIER.A value of 50mA is set for the output current in this case.This audio amplifier ic gains a voltage of 79.08dB when it is powered up.
LT1191CS8#PBF Features
Operational Amplifier subcategory
8 pins
1 channels
LT1191CS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1191CS8#PBF Video Amps and Modules applications.
- Emergency call (eCall)
- HiFi Audio System Equipment
- Microphone Preamplifiers
- Automotive
- Body Control Modules
- Audio Test And Measurement
- Car Audio
- Automotive head unit
- Analog and Digital Mixing Consoles
- Preamplification and Filtering