LT1193CN8#PBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Package / Case | DIP |
| Number of Pins | 8 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 4V |
| Operating Supply Current | 35mA |
| Max Supply Current | 40mA |
| Current - Output | 50mA |
| Slew Rate | 500 V/μs |
| Common Mode Rejection Ratio | 55 dB |
| Current - Input Bias | 3.5μA |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 80MHz |
| Gain Bandwidth Product | 26.5MHz |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Max Dual Supply Voltage | 9V |
| -3db Bandwidth | 80MHz |
| Min Dual Supply Voltage | 2V |
| Dual Supply Voltage | 5V |
| Nominal Gain Bandwidth Product | 80MHz |
| Number of Amplifiers | 1 |
| Height | 3.3mm |
| Length | 10.16mm |
| Width | 6.48mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LT1193CN8#PBF Overview
Op amp is packaged in DIP case. It has 8 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 2mV. An 35mA volt supply current is needed for this linear amplifier to operate. In total, there are 1 circuits on this buffer amplifier. 1 channels are available on the instrumentation amplifier. The temperature should not be lower than 0°C for operational amplifier ics to operate. You should not use op amp above 70°C degrees. The operating supply voltage of the buffer op amp is rated at 5V. In terms of the supply voltage, this electrical part is capable of operating at low voltage levels of under 18V. In order to ensure that the instrumentation amplifier's supply voltage remains above 4V, it is recommended to keep it higher. In order to conduct this part, you will need to provide dual supply voltages of 9V volts. A total of 1 instrumentation amplifiers are present on the device.
LT1193CN8#PBF Features
LT1193CN8#PBF Applications
There are a lot of Analog Devices, Inc. LT1193CN8#PBF Instrumentational OP Amps applications.
- Video data acquisition
- Addition operation circuits
- Band-pass filter
- Portable docking station
- Proportional counter tubes
- High input resistance broadband
- Industrial control system
- Multimedia playback equipment
- Cinema or auditorium audio system
- Television
