LT1206CR#TRPBF

1 Channels 1.2A per Channel 10μA 50 dB Instrumentational OP Amps TO-263-8

Manufacturer: Analog Devices, Inc.
Nocochips NO: 84-LT1206CR#TRPBF
Package: TO-263-8
Datasheet: PDF
Stock: 698
Description: 1 Channels 1.2A per Channel 10μA 50 dB Instrumentational OP Amps TO-263-8(Kg)

Details

Tags

Parameters
Lifecycle Status	PRODUCTION (Last Updated: 1 week ago)
Package / Case	TO-263-8
Number of Pins	7
Max Operating Temperature	70°C
Min Operating Temperature	0°C
Number of Elements	1
Number of Channels	1
Number of Circuits	1
Max Supply Voltage	36V
Min Supply Voltage	10V
Operating Supply Current	20mA
Slew Rate	900 V/μs
Common Mode Rejection Ratio	50 dB
Current - Input Bias	10μA
Output Current per Channel	1.2A
Input Offset Voltage (Vos)	3mV
Voltage Gain	68dB
Power Supply Rejection Ratio (PSRR)	60dB
Max Dual Supply Voltage	15V
-3db Bandwidth	60MHz
Min Dual Supply Voltage	5V
Nominal Gain Bandwidth Product	66MHz
RoHS Status	RoHS Compliant
Lead Free	Lead Free

LT1206CR#TRPBF Overview

In order to protect the op amps, a TO-263-8 case is used. 7 pins are located on the operational amplifiers. The input offset voltage is 3mV. A supply current of 20mA can be used to operate this linear amplifier. There should be no change in the voltage gain. There are 1 circuits on this op amp. Buffer op amp is equipped with 1 channels on the device. To operate this buffer amplifier, the temperature must not be lower than 0°C. At temperatures greater than 70°C, Instrumentation amplifier should not be used. A total of 1 elements are present in this linear amplifier. In terms of the supply voltage, this electrical part is capable of operating at low voltage levels of under 36V. A high supply voltage of more than 10V is recommended for the instrumentation amplifier's supply voltage. As a general rule, you should conduct this electronic component under dual supply voltages of 15V volts.