LT1212IS
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2001 |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | LT1212 |
| Pin Count | 16 |
| Number of Elements | 4 |
| Power Supplies | 3.3/5/+-15V |
| Operating Supply Current | 1.8mA |
| Supply Current-Max | 12mA |
| Slew Rate | 7V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 84 dB |
| Current - Input Bias | 60nA |
| Voltage - Supply, Single/Dual (±) | 2.5V~36V ±1.25V~18V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 100μV |
| Gain Bandwidth Product | 14MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 14000 kHz |
| Voltage Gain | 111.82dB |
| Average Bias Current-Max (IIB) | 0.13μA |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 150μV |
| Bias Current-Max (IIB) @25C | 0.125μA |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Nominal Gain Bandwidth Product | 13MHz |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LT1212IS Overview
Op amp is packaged in 16-SOIC (0.154, 3.90mm Width) case. There are two types of operational amplifiers in this circuit. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. There have been a total of 16 terminations over the past year. Buffer amplifier has a total of 16 pins. Please take in mind that op amp should be run at 15V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. It has 16 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 100μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureIt is possible to operate this buffer amplifier from a supply current of 1.8mA . There should be no change in the voltage gain. There is a rating of 4 for the operating supply voltage of the buffer op amp.
LT1212IS Features
16 Pins
supply voltage of 15V
111.82dB voltage gain
LT1212IS Applications
There are a lot of Linear Technology/Analog Devices LT1212IS Instrumentational OP Amps applications.
- RF cable systems
- Semiconductor detectors
- Subtraction operation circuits
- Logarithmic operation circuits
- Thermocouples
- Non-polarized electrodes
- Addition operation circuits
- Commercial audio systems
- Information processing
- Television
