banner_page

LT1212IS#PBF

50mA per Channel 60nA 84 dB Instrumentational OP Amps 0.13μA 2.5V~36V ±1.25V~18V LT1212 16 Pins 16-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Linear Technology/Analog Devices
  • Nocochips NO: 471-LT1212IS#PBF
  • Package: 16-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 711
  • Description: 50mA per Channel 60nA 84 dB Instrumentational OP Amps 0.13μA 2.5V~36V ±1.25V~18V LT1212 16 Pins 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status PRODUCTION (Last Updated: 3 months ago)
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 16
Operating Temperature -40°C~85°C
Packaging Tube
Published 2001
JESD-609 Code e3
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Terminal Finish Matte Tin (Sn)
Subcategory Operational Amplifier
Technology BIPOLAR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 15V
Terminal Pitch 1.27mm
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number LT1212
Pin Count 16
Number of Elements 4
Power Supplies 3.3/5/+-15V
Operating Supply Current 1.8mA
Supply Current-Max 12mA
Slew Rate 7V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 84 dB
Current - Input Bias 60nA
Voltage - Supply, Single/Dual (±) 2.5V~36V ±1.25V~18V
Output Current per Channel 50mA
Input Offset Voltage (Vos) 100μV
Gain Bandwidth Product 14MHz
Neg Supply Voltage-Nom (Vsup) -15V
Unity Gain BW-Nom 14000 kHz
Voltage Gain 111.82dB
Average Bias Current-Max (IIB) 0.13μA
Power Supply Rejection Ratio (PSRR) 85dB
Low-Offset YES
Frequency Compensation YES
Supply Voltage Limit-Max 18V
Voltage - Input Offset 150μV
Bias Current-Max (IIB) @25C 0.125μA
Neg Supply Voltage-Max (Vsup) -18V
Nominal Gain Bandwidth Product 13MHz
Height Seated (Max) 1.75mm
Length 9.9mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

LT1212IS#PBF Overview


There is a 16-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. This is a General Purpose type op amp. In the case of Tube cases, linear amplifier will be delivered. There have been a total of 16 terminations over the past year. Buffer amplifier has a total of 16 pins on it. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. The buffer op amp includes 16 pins. Op amp ic rates 100μV for input offset voltage. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . This op amp can operate from a supply current at 1.8mA. Voltage gain should remain at 111.82dB. The linear amplifier consists of 4 different elements in total.

LT1212IS#PBF Features


16 Pins
supply voltage of 15V
111.82dB voltage gain

LT1212IS#PBF Applications


There are a lot of Linear Technology/Analog Devices LT1212IS#PBF Instrumentational OP Amps applications.

  • Signal operation
  • Information processing
  • Polarized electrodes
  • Video conversion and routing
  • Proportional operation circuits
  • MP3
  • Comparator
  • Displayers for aircraft and air transportation control systems
  • Instrumentation
  • Signal amplification

Write a review

Note: HTML is not translated!
    Bad           Good