LT1215CN8#PBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2001 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LT1215 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 18V |
| Number of Channels | 2 |
| Operating Supply Current | 5.7mA |
| Supply Current-Max | 19mA |
| Slew Rate | 50V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 86 dB |
| Current - Input Bias | 360nA |
| Voltage - Supply, Single/Dual (±) | 2.5V~36V ±1.25V~18V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 125μV |
| Bandwidth | 23MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 23000 kHz |
| Voltage Gain | 115.56dB |
| Power Supply Rejection Ratio (PSRR) | 93dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 250μV |
| Bias Current-Max (IIB) @25C | 0.6μA |
| Dual Supply Voltage | 15V |
| Nominal Gain Bandwidth Product | 23MHz |
| Height Seated (Max) | 3.937mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
LT1215CN8#PBF Overview
In the package, you will find a 8-DIP (0.300, 7.62mm)-case to contain the op amp ic. Op amps are General Purpose types of amplifier on the chip. In the case of Tube cases, linear amplifier will be delivered. We are approaching the 8h termination of the year. There are a total of 8 pins on this op amp. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. A total of 8 pins are present on the instrumentation amplifier. As far as the input offset voltage is concerned, linear amplifier rates at 125μV. For this electrical component, the recommended mounting type is Through Hole, which is the most common. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of 0°C~70°C. Using an 5.7mA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 115.56dB for the time being. The op amp ic has 2 channels on it. The operating supply voltage of instrumentation amplifier is rated 18V voltage.
LT1215CN8#PBF Features
8 Pins
supply voltage of 15V
115.56dB voltage gain
LT1215CN8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1215CN8#PBF Instrumentational OP Amps applications.
- Polarized electrodes
- ECG equipment
- Digital cameras
- Information processing
- Fission chambers
- Ultrasound transducers
- Band-stop filter
- Multimedia playback equipment
- Radar
- Proportional counter tubes
