LT1216CS#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2001 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1216 |
| Pin Count | 16 |
| Operating Supply Voltage | 3V |
| Number of Channels | 4 |
| Operating Supply Current | 5.7mA |
| Max Supply Current | 26.4mA |
| Slew Rate | 50V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 86 dB |
| Current - Input Bias | 360nA |
| Voltage - Supply, Single/Dual (±) | 2.5V~36V ±1.25V~18V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 150μV |
| Bandwidth | 23MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 23000 kHz |
| Voltage Gain | 115.56dB |
| Average Bias Current-Max (IIB) | 0.8μA |
| Power Supply Rejection Ratio (PSRR) | 93dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 250μV |
| Bias Current-Max (IIB) @25C | 0.6μA |
| Dual Supply Voltage | 15V |
| Nominal Gain Bandwidth Product | 23MHz |
| Height | 1.5mm |
| Length | 10.01mm |
| Width | 3.99mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1216CS#PBF Overview
A 16-SOIC (0.154, 3.90mm Width) case is used to package the op amp. The instrumentation amplifier in this picture is of the General Purpose-type. Instrumentation amplifier is delivered in a Tube case. There have been a total of 16 terminations over the past year. There are a total of 16 pins on this op amp. Please take in mind that this instrumentation amplifier should be run at 15V. To be specific, this instrumentation amplifier is a type of Operational Amplifier. The buffer op amp includes 16 pins. There is an input offset voltage of 150μV for this buffer op amp. This electrical part should be mounted using type Surface Mount. According to the manufacturer, this buffer op amp works well at 0°C~70°C , which is a good operating temperature. Operational amplifier can operate supply current at 5.7mA. The voltage gain should stay at 115.56dB. Instrumentation amplifier has 4 channels on it. The operating supply voltage of the buffer op amp is rated at 3V.
LT1216CS#PBF Features
16 Pins
supply voltage of 15V
115.56dB voltage gain
LT1216CS#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1216CS#PBF Instrumentational OP Amps applications.
- Measurements of Wheatstone bridge
- Video conversion and routing
- Automation control systems
- Video data acquisition
- Signal filtering
- Medical imaging
- Portable media players
- Radar
- Image computer boards
- Division circuits
