LT1217CN8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | LT1217 |
| Pin Count | 8 |
| Number of Elements | 1 |
| Operating Supply Current | 1mA |
| Supply Current-Max | 2mA |
| Slew Rate | 500V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 100nA |
| Voltage - Supply, Single/Dual (±) | 9V~36V ±4.5V~18V |
| Output Current per Channel | 100mA |
| Input Offset Voltage (Vos) | 1mV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 105dB |
| Average Bias Current-Max (IIB) | 0.5μA |
| Power Supply Rejection Ratio (PSRR) | 68dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| -3db Bandwidth | 10MHz |
| Bias Current-Max (IIB) @25C | 0.5μA |
| Nominal Gain Bandwidth Product | 10MHz |
| Height Seated (Max) | 3.937mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1217CN8#PBF Overview
Op amp is packaged in 8-DIP (0.300, 7.62mm) case. A Current Feedback-type buffer amplifier is shown here. The case in which buffer amplifier is delivered is called a Tube case. The number of terminations is approaching the 8 mark. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 15V volts. This particular linear amplifier is a type of Operational Amplifier device, to be precise. A total of 8 pins are present on the instrumentation amplifier. In terms of input offset voltage, operational amplifier rates 1mV. This electrical part should be mounted using type Through Hole. With regard to operating temperature, op amp ranges 0°C~70°C. A supply current of 1mA can be used to operate this linear amplifier. Keeping the voltage gain at 105dB is the best course of action. There is a rating of 1 for the operating supply voltage of the buffer op amp.
LT1217CN8#PBF Features
8 Pins
supply voltage of 15V
105dB voltage gain
LT1217CN8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1217CN8#PBF Instrumentational OP Amps applications.
- Differentiator circuits
- Non-polarized electrodes
- Division circuits
- Hand-held batteries
- RF cable systems
- High-frequency data acquisition systems
- High speed sample
- Integrator circuits
- Industrial control system
- Test and measurement instruments
