LT1218CS8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1218 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Operating Supply Current | 425μA |
| Supply Current-Max | 0.6mA |
| Slew Rate | 0.1V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 97 dB |
| Current - Input Bias | 30nA |
| Voltage - Supply, Single/Dual (±) | 2V~30V ±1V~15V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 25μV |
| Gain Bandwidth Product | 280kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 300 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.075μA |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Voltage - Input Offset | 85μV |
| Nominal Gain Bandwidth Product | 300 kHz |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1218CS8#PBF Overview
There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. Buffer amps of this type are called General Purpose-types. Instrumentation amplifier is delivered in a Tube case. A total of 8 terminations have been reported in the past few weeks. In this case, there are 8 pins on the board. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. An 8-pin op amp ic is included in the package. The input offset voltage is 25μV. The mounting type that is recommended for this electrical part is Surface Mount. With regard to operating temperature, this op amp functions well at 0°C~70°C. An 425μA volt supply current is needed for this linear amplifier to operate. 120dB should be the voltage gain. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. The buffer op amp is rated for an operating voltage of 1 when it comes to the power supply.
LT1218CS8#PBF Features
8 Pins
supply voltage of 15V
120dB voltage gain
Output Type: Rail-to-Rail
LT1218CS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1218CS8#PBF Instrumentational OP Amps applications.
- Band-stop filter
- Automatic control
- Information processing
- Fission chambers
- Television
- Micro signal measurement
- Navigation
- High input resistance broadband
- Radiation thermometry transducers
- single/dual op amp sum and difference circuits
