LT1218LCS8#PBF
| Parameters | |
|---|---|
| Slew Rate | 0.1V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 97 dB |
| Current - Input Bias | 30nA |
| Voltage - Supply, Single/Dual (±) | 2V~10V ±1V~5V |
| Output Current per Channel | 12mA |
| Input Offset Voltage (Vos) | 25μV |
| Bandwidth | 300 kHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 300 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.075μA |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Voltage - Input Offset | 35μV |
| Nominal Gain Bandwidth Product | 300 kHz |
| Length | 4.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1218 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 400μA |
| Supply Current-Max | 0.495mA |
LT1218LCS8#PBF Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. This is a General Purpose type op amp. The case in which buffer amplifier is delivered is called a Tube case. It is estimated that there will be at least 8 terminations this year. In total, there are 8 pins on this op amp ic. Please take in mind that this instrumentation amplifier should be run at 5V. It should be noted that this op amp is a type of Operational Amplifier device. A total of 8 pins are present on the instrumentation amplifier. In terms of input offset voltage, operational amplifier rates 25μV. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . Using a supply current of 400μA , this buffer op amp will be able to operate. Op amp is a member of the 120dB's 120dB family. On the buffer amps, there are 1 channels that can be used. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages.
LT1218LCS8#PBF Features
8 Pins
supply voltage of 5V
120dB voltage gain
Output Type: Rail-to-Rail
LT1218LCS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1218LCS8#PBF Instrumentational OP Amps applications.
- Automatic control
- Portable docking station
- Signal transformation
- Weighing systems
- ECG equipment
- Digital cameras
- Proportional operation circuits
- Integrator circuits
- Measurements of Wheatstone bridge
- Portable electronic products powered by batteries
