LT1219CS8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1997 |
| Series | C-Load™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1219 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Number of Circuits | 1 |
| Operating Supply Current | 425μA |
| Max Supply Current | 420μA |
| Slew Rate | 0.05V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 97 dB |
| Current - Input Bias | 30nA |
| Voltage - Supply, Single/Dual (±) | 2V~30V ±1V~15V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 25μV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 150 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.075μA |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Low-Offset | YES |
| Frequency Compensation | NO |
| Voltage - Input Offset | 85μV |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.07μA |
| Dual Supply Voltage | 3V |
| Nominal Gain Bandwidth Product | 150 kHz |
| Height | 1.5mm |
| Length | 5mm |
| Width | 3.99mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1219CS8#PBF Overview
There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. Buffer amps of this type are called General Purpose-types. Upon delivery, op amp ic is packaged in a Tube case. In recent months, the number of terminations has approached 8. The pins on this board total to 8 in total. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. A total of 8 pins are present on the instrumentation amplifier. Regarding input offset voltage, buffer amplifier rates 25μV voltage. For this electrical component, Surface Mount is the recommended mounting type. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . Using a supply current of 425μA , this buffer op amp will be able to operate. It is a member of the 120dB's 120dB family. On this buffer amplifier, there are 1 circuits. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. It is possible to count 1 elements on this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5V. Buffer op amp series numbers are indicated by the C-Load?.
LT1219CS8#PBF Features
8 Pins
supply voltage of 15V
120dB voltage gain
Output Type: Rail-to-Rail
LT1219CS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1219CS8#PBF Instrumentational OP Amps applications.
- Multimedia playback equipment
- pH (acidity)
- Test equipment
- Digital cameras
- Ultrasound transducers
- Biopotential
- Scintillation detectors
- Video computer boards
- Thermocouples
- Proportional operation circuits
