LT1221CS8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2001 |
| Series | C-Load™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1221 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Number of Circuits | 1 |
| Operating Supply Current | 8mA |
| Slew Rate | 250V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 92 dB |
| Current - Input Bias | 100nA |
| Voltage - Supply, Single/Dual (±) | ±5V~15V |
| Output Current per Channel | 26mA |
| Input Offset Voltage (Vos) | 200μV |
| Gain Bandwidth Product | 150MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 150000 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.4μA |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Low-Offset | NO |
| Frequency Compensation | YES AVCL>=4 |
| Bias Current-Max (IIB) @25C | 0.3μA |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1221CS8#PBF Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. Buffer amps of this type are called General Purpose-types. There is a Tube case that is delivered with the instrumentation amplifiers. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. It should be noted that this op amp is a type of Operational Amplifier device. It has 8 pins that make up the linear amplifier. Regarding input offset voltage, op amp rates 200μV. Surface Mount is the recommended mounting type for this linear amplifier. With regard to operating temperature, this op amp functions well at 0°C~70°C. Using a supply current of 8mA , this buffer op amp will be able to operate. Maintain 100dB as the voltage gain. There are 1 circuits on op amps. The op amp is rated for an operating supply voltage of 1. C-Load? is the number that corresponds to the series of the buffer op amp.
LT1221CS8#PBF Features
8 Pins
supply voltage of 15V
100dB voltage gain
LT1221CS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1221CS8#PBF Instrumentational OP Amps applications.
- Inverse/same-phase proportional circuit
- Television
- High-frequency data acquisition systems
- Computer workstations
- Communication
- Industrial control system
- ECG equipment
- Portable electronic products powered by batteries
- Mobile phone
- Non-polarized electrodes
