LT1222CN8#PBF
| Parameters | |
|---|---|
| Voltage - Supply, Single/Dual (±) | ±5V~15V |
| Output Current per Channel | 26mA |
| Input Offset Voltage (Vos) | 100μV |
| Bandwidth | 500MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 500000 kHz |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.4μA |
| Power Supply Rejection Ratio (PSRR) | 98dB |
| Low-Offset | YES |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.3μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 500MHz |
| Height Seated (Max) | 3.937mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1999 |
| Series | C-Load™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LT1222 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Operating Supply Current | 8mA |
| Slew Rate | 200V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 100nA |
LT1222CN8#PBF Overview
The linear amplifier is packaged in a 8-DIP (0.300, 7.62mm) case. There are two types of operational amplifiers in this circuit. There is a Tube case that is delivered with the instrumentation amplifiers. A total of 8 terminations have been reported in the past few weeks. The pins on this board total to 8 in total. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. 8 pins are located on the operational amplifiers. Regarding input offset voltage, buffer amplifier rates 100μV voltage. It is recommended that this electronic component be mounted using the Through Hole mounting type. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around 0°C~70°C . As long as the supply current of the chip does not exceed 8mA, this op amp ic can operate. Keeping the voltage gain at 106.02dB is the best course of action. The op amp ic has 1 channels on it. As the name implies, C-Load? refers to the series of the buffer op amp.
LT1222CN8#PBF Features
8 Pins
supply voltage of 15V
106.02dB voltage gain
LT1222CN8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1222CN8#PBF Instrumentational OP Amps applications.
- Biopotential
- Scintillation detectors
- Commercial audio systems
- High input resistance broadband
- Signal amplification
- MP3
- Mobile phone
- Gaming industry
- Semiconductor detectors
- Power control
