LT1224CN8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LT1224 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Operating Supply Current | 7mA |
| Slew Rate | 400V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 86 dB |
| Current - Input Bias | 4μA |
| Voltage - Supply, Single/Dual (±) | ±2.5V~15V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 45MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 45000 kHz |
| Voltage Gain | 76.9dB |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Nominal Gain Bandwidth Product | 45MHz |
| Height Seated (Max) | 3.937mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1224CN8#PBF Overview
In the package, you will find a 8-DIP (0.300, 7.62mm)-case to contain the op amp ic. Op amps are General Purpose types of amplifier on the chip. Instrumentation amplifier is delivered in a Tube case. In recent months, the number of terminations has approached 8. A total of 8 pins are located on this board. Please take in mind that op amp should be run at 15V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. The buffer op amp includes 8 pins. There is an input offset voltage of 500μV for this buffer op amp. For this electrical component, Through Hole is the recommended mounting type. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . You can run this op amp ic on 7mA . You should keep the voltage gain at 76.9dB for the time being. There is a rating of 1 for the operating supply voltage of the buffer op amp.
LT1224CN8#PBF Features
8 Pins
supply voltage of 15V
76.9dB voltage gain
LT1224CN8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1224CN8#PBF Instrumentational OP Amps applications.
- pH (acidity)
- Fast A/D and D/A converters
- Portable media players
- earphone
- Image computer boards
- ECG equipment
- Radiation thermometry transducers
- Large motor controllers
- Micro signal measurement
- Band-stop filter
