LT1225CN8#PBF

1 Channels 40mA per Channel 4μA 94 dB Instrumentational OP Amps DIP

Manufacturer: Analog Devices, Inc.
Nocochips NO: 84-LT1225CN8#PBF
Package: DIP
Datasheet: PDF
Stock: 886
Description: 1 Channels 40mA per Channel 4μA 94 dB Instrumentational OP Amps DIP(Kg)

Details

Tags

Parameters
Lifecycle Status	PRODUCTION (Last Updated: 1 week ago)
Package / Case	DIP
Number of Pins	8
Max Operating Temperature	70°C
Min Operating Temperature	0°C
Number of Elements	1
Number of Channels	1
Number of Circuits	1
Max Supply Voltage	36V
Min Supply Voltage	5V
Operating Supply Current	7mA
Slew Rate	400 V/μs
Common Mode Rejection Ratio	94 dB
Current - Input Bias	4μA
Output Current per Channel	40mA
Input Offset Voltage (Vos)	500μV
Gain Bandwidth Product	100MHz
Voltage Gain	83.52dB
Power Supply Rejection Ratio (PSRR)	86dB
Max Dual Supply Voltage	15V
Min Dual Supply Voltage	2.5V
Nominal Gain Bandwidth Product	150MHz
RoHS Status	RoHS Compliant
Lead Free	Lead Free

LT1225CN8#PBF Overview

Packaged in a DIP case, the buffer op amp is ready to use. A total of 8 pins are present on the instrumentation amplifier. Regarding input offset voltage, op amp rates 500μV. In order for this instrumentation amplifier to operate, the supply current needs to be between 7mA and 10 . 83.52dB should be the voltage gain. On this buffer amplifier, there are 1 circuits. On the buffer amps, there are 1 channels that can be used. Using this buffer op amp requires a temperature of at least 0°C. It is recommended that op amp be used at temperatures below 70°C. The op amp is rated for an operating supply voltage of 1. The electrical part is capable of being powered by a voltage of under 36V, which means that it can be used with any voltage supply. It is advised to keep the op amp's supply voltage higher than 5V. It is recommended that you conduct this electronic part using the dual supply voltage of 15V.