LT1229CN8#PBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Package / Case | DIP |
| Number of Pins | 8 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Number of Elements | 2 |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 4V |
| Operating Supply Current | 6mA |
| Max Supply Current | 9.5mA |
| Slew Rate | 700 V/μs |
| Common Mode Rejection Ratio | 55 dB |
| Current - Input Bias | 10μA |
| Output Current per Channel | 125mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 100MHz |
| Voltage Gain | 65dB |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Max Dual Supply Voltage | 15V |
| -3db Bandwidth | 100MHz |
| Min Dual Supply Voltage | 2V |
| Dual Supply Voltage | 9V |
| Nominal Gain Bandwidth Product | 100MHz |
| Number of Amplifiers | 2 |
| Height | 3.3mm |
| Length | 10.16mm |
| Width | 6.48mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LT1229CN8#PBF Overview
The linear amplifier is packaged in a DIP case which makes it easy for the consumer to handle. The op amp ic has an array of 8 pins on it. Regarding input offset voltage, buffer amplifier rates 3mV voltage. It is possible to operate this buffer amplifier from a supply current of 6mA . Maintain 65dB as the voltage gain. The buffer amp consists of 2 circuits in total. The op amp ic has 2 channels on it. For this linear amplifier to work, the temperature should not be below 0°C. At temperatures greater than 70°C, op amp should not be used. 2 elements make up the design of this buffer amplifier. It is important to keep in mind that the power supply voltage of this electric component is below 36V, which is suitable. In order to ensure that the instrumentation amplifier's supply voltage remains above 4V, it is recommended to keep it higher. This electrical part should be conducted under the dual supply voltage of 15V volts when you conduct this part. On the linear amplifier, there are 2 amplifiers that are used.
LT1229CN8#PBF Features
65dB voltage gain
LT1229CN8#PBF Applications
There are a lot of Analog Devices, Inc. LT1229CN8#PBF Instrumentational OP Amps applications.
- Addition operation circuits
- Medical instruments
- Automotive sensors
- Commercial audio systems
- Vehicle electronics
- Hand-held batteries
- pH (acidity)
- High/low-pass filter circuit
- Semiconductor detectors
- Thermocouples
