LT1230CN#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2001 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LT1230 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Number of Elements | 4 |
| Operating Supply Current | 6mA |
| Slew Rate | 2500V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 55 dB |
| Current - Input Bias | 10μA |
| Voltage - Supply, Single/Dual (±) | 4V~30V ±2V~15V |
| Output Current per Channel | 125mA |
| Input Offset Voltage (Vos) | 3mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 100000 kHz |
| Voltage Gain | 65dB |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 100MHz |
| Bias Current-Max (IIB) @25C | 50μA |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Nominal Gain Bandwidth Product | 100MHz |
| Wideband | YES |
| Height Seated (Max) | 3.937mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1230CN#PBF Overview
In the package, you will find a 14-DIP (0.300, 7.62mm)-case to contain the op amp ic. This is a Current Feedback type op amp. Instrumentation amplifier is delivered in a Tube case. We are approaching the 14h termination of the year. The total number of pins on linear amplifier is 14. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. The op amp ic has an array of 14 pins on it. Op amp rates 3mV as input offset voltage. This electronic part is best mounted with type Through Hole. With regard to operating temperature, this op amp functions well at 0°C~70°C. An 6mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain at 65dB. There are a total of 4 elements in this linear amplifier.
LT1230CN#PBF Features
14 Pins
supply voltage of 5V
65dB voltage gain
LT1230CN#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1230CN#PBF Instrumentational OP Amps applications.
- Communication
- Automotive sensors
- Weighing systems
- Blood pressure sensors
- E-book readers
- Voltage regulation circuit
- Division circuits
- High-frequency data acquisition systems
- Computer workstations
- Differentiator circuits
