LT1253CN8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Applications | Current Feedback |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LT1253 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Elements | 2 |
| Temperature Grade | COMMERCIAL |
| Operating Supply Current | 6mA |
| Quiescent Current | 6mA |
| Slew Rate | 250V/μs |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 55 dB |
| Voltage - Supply, Single/Dual (±) | 4V~28V ±2V~14V |
| Output Current per Channel | 55mA |
| Input Offset Voltage (Vos) | 15mV |
| Gain Bandwidth Product | 90MHz |
| Neg Supply Voltage-Nom (Vsup) | -12V |
| Unity Gain BW-Nom | 90000 kHz |
| Voltage Gain | 63.52dB |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 14V |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 270MHz |
| Programmable Power | NO |
| Input Bias Current | 15μA |
| Neg Supply Voltage-Max (Vsup) | -14V |
| Wideband | YES |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1253CN8#PBF Overview
A Tube package contains class d amplifier.For the sake of reducing space, class d amp is accessible in the 8-DIP (0.300, 7.62mm) package.This is a good choice for Current Feedback because of audio amplifiers high performance.A Through Hole mounting method is used to connect audio power amplifier to the PCB.In order to find audio amp, use its base part number LT1253.The pin count is 8.Digital amplifier has 8 terminations.Its -3db bandwidth is 270MHz.It is audio power amplifier of Operational Amplifier.Audio amplifier runs on 6mA supply current.Using 8 pins, amplifier ic is constructed.In order to ensure proper operation, the operating temperature should be below 70°C.Ideally, the operating temperature should be 0°C.Using 12V supply voltage results in high efficiency.Through Hole is used as its mounting method.A OPERATIONAL AMPLIFIER amplifier type is present in the audio amplifier.A voltage of 63.52dB is achieved by the audio amplifier ic.A quiescent current of 6mA is consumed by it, and the external environment has no impact on it.In total, 2 elements are present.
LT1253CN8#PBF Features
Operational Amplifier subcategory
8 pins
LT1253CN8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1253CN8#PBF Video Amps and Modules applications.
- Body Control Modules
- Audio Test And Measurement
- Car Audio
- HiFi Audio System Equipment
- Automotive
- Audio Test and Measurement
- Professional Audio Equipment
- External Audio Amplifiers
- Analog and Digital Mixing Consoles
- Automotive external amplifier
