LT1256CS#TRPBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Package / Case | SOIC |
| Number of Pins | 14 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Number of Elements | 1 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 5V |
| Operating Supply Current | 14.5mA |
| Quiescent Current | 13.5mA |
| Slew Rate | 300 V/μs |
| Common Mode Rejection Ratio | 50 dB |
| Current - Input Bias | 2.5μA |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 2mV |
| Voltage Gain | 93dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Max Dual Supply Voltage | 15V |
| -3db Bandwidth | 40MHz |
| Min Dual Supply Voltage | 2.5V |
| Nominal Gain Bandwidth Product | 40MHz |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LT1256CS#TRPBF Overview
Op amp is packaged in SOIC case. 14 pins are located on the operational amplifiers. In terms of the input offset voltage, instrumentation amplifier rates at 2mV. This op amp can operate from a supply current at 14.5mA. It is recommended to keep the voltage gain at 93dB at all times. During the manufacturing process, this buffer amplifier is divided into 1 circuits. On the buffer amps, there are 1 channels that can be used. For the buffer op amp to operate properly, it must be above the temperature of 0°C degrees Celsius. A temperature greater than 70°C should not be used for the operation of buffer amplifier. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 1. The electrical part is capable of being powered by a voltage of under 36V, which means that it can be used with any voltage supply. Keeping the linear amplifier's supply voltage above 5V is recommended. Conduct linear amplifier under the dual suuply voltage of 15V. There is an 13.5mA quiescent current in linear amplifier.
LT1256CS#TRPBF Features
93dB voltage gain
LT1256CS#TRPBF Applications
There are a lot of Analog Devices, Inc. LT1256CS#TRPBF Instrumentational OP Amps applications.
- Wireless base stations
- Signal amplification
- Displayers for aircraft and air transportation control systems
- Communication
- Division circuits
- Vehicle electronics
- Hand-held batteries
- Television
- High gain DC amplifier
- Micro signal measurement
