LT1259CS#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1259 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Number of Elements | 2 |
| Power Supplies | +-5/+-15V |
| Operating Supply Current | 5mA |
| Supply Current-Max | 15.8mA |
| Slew Rate | 1600V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 52 dB |
| Current - Input Bias | 20μA |
| Voltage - Supply, Single/Dual (±) | 4V~30V ±2V~15V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 130MHz |
| Gain Bandwidth Product | 130MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 130000 kHz |
| Voltage Gain | 69dB |
| Average Bias Current-Max (IIB) | 3μA |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 90μA |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Nominal Gain Bandwidth Product | 130MHz |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1259CS#PBF Overview
There is a 14-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. An op amp of this type is a Current Feedback-type. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. The number of terminations approaches 14. Buffer amplifier has a total of 14 pins on it. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. It should be noted that this op amp is a type of Operational Amplifier device. 14 pins are included on the operational amplifiers. Op amp rates 2mV as input offset voltage. For this electronic part, it is recommended that you mount it with type Surface Mount. With regard to operating temperature, op amp ranges 0°C~70°C. Operational amplifier can operate supply current at 5mA. There should be no change in the voltage gain at 69dB. There is a rating of 2 for the operating supply voltage of the buffer op amp.
LT1259CS#PBF Features
14 Pins
supply voltage of 15V
69dB voltage gain
LT1259CS#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1259CS#PBF Instrumentational OP Amps applications.
- Video conversion and routing
- Professional videography
- Weak signal detection
- Tablets
- Portable docking station
- Gaming industry
- Medical imaging
- Multimedia playback equipment
- Radar
- Polarized electrodes
