LT1260CS#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1260 |
| Pin Count | 16 |
| Power Supplies | +-5/+-15V |
| Number of Channels | 3 |
| Operating Supply Current | 5mA |
| Nominal Supply Current | 15mA |
| Slew Rate | 1600V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 52 dB |
| Current - Input Bias | 20μA |
| Voltage - Supply, Single/Dual (±) | 4V~30V ±2V~15V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 90MHz |
| Gain Bandwidth Product | 130MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 130000 kHz |
| Voltage Gain | 69dB |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 2mV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 90μA |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1260CS#PBF Overview
The linear amplifier is packaged in a 16-SOIC (0.154, 3.90mm Width) case. A Current Feedback-type buffer amplifier is shown here. In the case of Tube cases, linear amplifier will be delivered. A total of 16 terminations have been reported in the past few weeks. Buffer amplifier has a total of 16 pins. Please take in mind that op amp should be run at 15V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. An 16-pin op amp ic is included in the package. In terms of the input offset voltage, instrumentation amplifier rates at 2mV. This electronic part is recommended for mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 5mA and 10 . The voltage gain should stay at 69dB. Buffer op amp is equipped with 3 channels on the device.
LT1260CS#PBF Features
16 Pins
supply voltage of 15V
69dB voltage gain
LT1260CS#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1260CS#PBF Instrumentational OP Amps applications.
- Signal filtering
- Television broadcasting equipment
- Navigation
- Image computer boards
- Integrator circuits
- Biopotential
- Weak signal detection
- ECG equipment
- Information processing
- Video data acquisition
